CT volume rendering of the upper section of a cylindrical battery cell, showing the crimped can top and the electrode winding inside

BliXray offers the BLXR-MICROPRO, a fully automatic inline CT system for cylindrical battery cells that measures electrode overhang and gap in every cell at a resolution below 20 µm. With four parallel X-ray sources, the BLXR-MICROPRO scans 21700-format cells at up to 288 cells per minute.

The BLXR-MICROPRO is designed for the 21700 and 46800 cell and pack lines now being built in the West. It combines barcode tracking, robotic handling, computed tomography (CT) and automatic sorting in one line. Each cell leaves the station with its own measurement record and a pass or reject decision. BliXray supplies the system as a complete station, from barcode scanner to reject storage.

  • Fully automatic: loading, unloading, material handling, scanning, analysis and sorting run without an operator.
  • Traceable: a barcode scanner identifies every cell before it enters the X-ray station.
  • Measured in every cell: gap from cell can to electrodes, gap from cell top to electrodes, and anode-to-cathode overhang distance.
  • Scalable: one to four parallel X-ray sources for 21700-format cells.
  • Resolution: below 20 µm.

One line from barcode to reject storage

The BLXR-MICROPRO runs each cell through seven stations: barcode scanner, loading robot, X-ray source with rotating fixture, detector, unloading robot, NG sorter and NG storage. The rotating fixture turns the cell through 180° for each scan, which keeps the cycle short. The NG sorter takes rejected cells out of the production stream automatically and places them in separate storage for analysis. Every result is linked to the cell’s barcode, so the line keeps a record of the internal geometry of each cell it releases.

Overhang and gap measured in every cell

The system reports three internal dimensions automatically after each scan. It measures the gap between the cell can and the electrodes, the gap between the cell top and the electrodes, and the overhang distance from anode to cathode. These clearances are leading indicators of internal short-circuit and lithium-plating risk in cylindrical cells. At a resolution below 20 µm, the BLXR-MICROPRO resolves them in each cell rather than in a sample taken from the lot.

“The BLXR-MICROPRO gives a cell or pack maker a measured overhang and gap value for every cylindrical cell, linked to its barcode,” says Adrian de Riz, Managing Director, BliXray Technologies GmbH. “Cells outside tolerance are sorted out on the line, before they are built into a module.”

Throughput matched to the cell format

For 21700-format cells, the BLXR-MICROPRO uses a 225 kV open microfocus X-ray source. A 180° scan takes 3 s, plus 2 s for loading and unloading. One X-ray source delivers 72 cells per minute (CPM) at 95% overall equipment effectiveness (OEE). Two, three and four parallel sources raise this to 144, 216 and 288 CPM.

For the larger 46800-format cells, the system uses a 160 kV, 700 W X-ray source. A 180° scan takes 15 s, plus 2 s for loading and unloading. One source delivers 14 CPM at 95% OEE, and two sources deliver 28 CPM. The number of sources is chosen to match the cell format and the line speed.

“We configure the BLXR-MICROPRO around the cell format and the speed of the line,” says Adrian de Riz. “Adding a parallel X-ray source raises throughput without changing the inspection itself.”

Test scans available

BliXray offers test scans of cylindrical cells to show the overhang and gap results on the customer’s own parts. More on battery applications is on the batteries page, and test scans can be booked through the CT testing service.

Contact: Adrian de Riz, Managing Director, BliXray Technologies GmbH, a.deriz@blix-ray.de, +49 511 57092696 – www.blix-ray.de

BliXray Technologies GmbH, c/o Technologiezentrum, Hollerithallee 17, 30419 Hannover, Germany

About BliXray: BliXray Technologies GmbH, Hannover, designs and builds industrial CT systems and X-ray safety cabinets. CT for critical parts. Shielding for any source.